Cisco Catalyst 6500 Series Command Reference Manual page 99

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
6
7
8
9
10
11
12
13
Usage count of this policy: 0
ssl-proxy#
This example shows how to display policy information about a specific SSL policy that is configured on
the SSL Services Module:
ssl-proxy# show ssl-proxy policy ssl ssl-policy1
No context name provided, assuming context 'Default'...
Cipher suites: (None configured, default ciphers included)
SSL Versions enabled:SSL3.0, TLS1.0
close protocol: default (close_notify sent but not expected from peer)
Session Cache:enabled
Session timeout: 72000 seconds
Renegotiation timeout: 100 seconds
Handshake timeout not configured (never times out)
TLS Rollback: default (version number rollback not allowed)
No. of policy users : 0
ssl-proxy#
This example shows how to display policy information about a specific TCP policy that is configured on
the SSL Services Module:
ssl-proxy# show ssl-proxy policy tcp tcp-policy1
No context name provided, assuming context 'Default'...
MSS
SYN timeout
Idle timeout
FIN wait timeout
Reassembly timeout 60
Persist timeout
Rx Buffer Share
Tx Buffer Share
TOS Carryover
Delayed ACK timer
Delayed ACK Threshold 2
Nagle algorithm
Forced ACK
No. of policy users : 0
ssl-proxy#
OL-9105-01
"g:"
"h:"
"i:"
"j:"
"k:"
"l:"
"m:"
"n:"
rsa-with-rc4-128-md5
rsa-with-rc4-128-sha
rsa-with-des-cbc-sha
rsa-with-3des-ede-cbc-sha
1460
75
600
75
0
32768
65536
Disabled
200
Enabled
Enabled
Catalyst 6500 Series Switch SSL Services Module Command Reference
show ssl-proxy policy
2-73