Ssl-Proxy Mac Address - Cisco Catalyst 6500 Series Command Reference Manual

ssl-proxy mac address

ssl-proxy mac address
To configure a MAC address, use the ssl-proxy mac address command.
Syntax Description mac-addr
Defaults This command has no default settings.
Command Modes Global configuration
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Usage Guidelines
Enter the MAC address in this format: H.H.H.
Examples
This example shows how to configure a MAC address:
ssl-proxy (config)# ssl-proxy mac address 00e0.b0ff.f232
ssl-proxy (config)#
Related Commands
show ssl-proxy mac address
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-90
ssl-proxy mac address mac-addr
MAC address; see the "Usage Guidelines" section for additional
information.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
OL-9105-01