Cisco Catalyst 6500 Series Command Reference Manual page 81

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
service
This example shows how to configure a clear-text web server for the SSL Services Module to forward
the decrypted traffic:
ssl-proxy (config-ctx-ssl-proxy)# server ipaddr 207.50.0.50 protocol tcp port 80
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a TCP policy for the given clear-text web server:
ssl-proxy (config-ctx-ssl-proxy)# server policy tcp tcppl1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a NAT pool for the client address that is used in the server
connection of the specified service SSL offload:
ssl-proxy (config-ctx-ssl-proxy)# nat client NP1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to enable a NAT server address for the server connection of the specified
service SSL offload:
ssl-proxy (config-ctx-ssl-proxy)# nat server
ssl-proxy (config-ctx-ssl-proxy)#
Related Commands
show ssl-proxy service
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-55
OL-9105-01