Denon AVR-X3300W Service Manual page 167

Error DPMS Update Error
Details of Error code
Code Display
Update Error**24 DPMS connection failure
24
notification after SBL.
25 Update Error**25 Failed to transit to SBL Mode.
Update Error**26 Error in Firmware Download
26
(Time Out).
Update Error**27 Failed to write to EEPROM
27
after SBL Mode.
Update Error**36 DPMS login incorrect notifica-
36
tion.
Update Error**38 DPMS connection failure
38
notification.
Update Error**39 DPMS connection Time Out
39
Error.
Error(NG) notification received
3A while requesting Firmware
Update Error**3A
Download.
Error(Connect failure) notifica-
3C tion received while request-
Update Error**3C
ing Firmware Download.
Update Error**3D After SBL Mode IP Address
3D
acquisition failure (AutoIP).
Update Error**3E After SBL Mode IP Address
3E
acquisition failure (Time Out).
3F Update Error**3F Failed to transit to SBL Mode.
Update Error**50 DPMS login incorrect notifica-
50
tion.
Update Error**52 DPMS connection failure
52
notification.
Remedies
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
167
Error DPMS Update Error
Details of Error code
Code Display
Error notification received
54 while requesting the Firm-
Update Error**54
ware Info.
Update Error**55 Time Out while obtaining
55
Firmware information.
Error(NG) notification received
56 while requesting Firmware
Update Error**56
Download.
Error(Connect failure) notifica-
58 tion received while request-
Update Error**58
ing Firmware Download.
Invalid Device ID in response
5A or no response from Sub for
Update Error**5A
the "C" command.
NACK received in response or
5B no response from Sub for the
Update Error**5B
"L" command.
Update Error**5C No Update Packet received
5C
from CY920 (Time Out).
Abnormal data in Update
5D Packet received from CY920
Update Error**5D
(CRC Error).
Abnormal data in Update
5E Packet received from CY920
Update Error**5E
(Packet No Error).
Update Error**5F Setup failure of the XModem
5F
transfer method.
NACK received in response or
60 no response from Sub for the
Update Error**60
"P" command.
Mismatched Check Sum in
61 response or no response from
Update Error**61
Sub for the "I" command.
Remedies
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Check the network connection, Unplug
and reconnect the AC plug, and try
again.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.
Unplug and reconnect the AC plug, and
try again.
If the same error occurs even when it is
retried, the device may be malfunction-
ing.