Denon AVR-X3300W Service Manual page 129

Paths to be confirmed Display
HDMI pass
fig.11
3
V03:HDMI PASS
(MAIN ZONE)
HDMI CEC
4 (Control Monitor : fig.12
V04:HDMI CEC
HDMI Monitor1)
HDMI Audio fig.13a
5
V05:H.AUDIO-AVR
(Audio : AVR) fig.13b
HDMI Audio
6 fig.14
V06:H.AUDIO-TV
(Audio : TV)
7 GUI fig.15
V07:GUI MENU ON
HDMI pass
8 fig.16
V08:ZONE2 HDMI
(ZONE2)
Settings
Input Source : CBL/SAT
Video Conversion (IP Scaler) : Off
MAIN ZONE : On
ZONE2 : Off
Input Source : CBL/SAT
HDMI Control : On
Control Monitor : Monitor1 (if checking the HDMI
Monitor Out1)
MAIN ZONE : On
ZONE2 : Off
Input Source : CBL/SAT
HDMI Control : Off
HDMI Audio : AVR (if checking the audio output from
AVR)
HDMI Audio : TV (if checking the audio output from TV)・ HDMI input (PCM , DolbyDigital , DTS) ⇒ HDMI output (audio output from connected TV)
Input Source : CBL/SAT
IP Scaler : On, All sources
Resolution : "AUTO", All sources
Setup Menu : On
MAIN ZONE : On
ZONE2 : Off
Input Source : CBL/SAT
Z2 Source : Source
MAIN ZONE : ON
ZONE2 : ON
ZONE3 : OFF
129
What to confirm
・ HDMI input (MAIN function) ⇒ HDMI output (MAIN)
( b The input source can be switched to any source except CBL/SAT.)
・ When the power supply of a TV is put in the standby mode, make sure that the power supply
of this unit is also put in the standby mode.
( b The input source can be switched to any source except CBL/SAT.)
・ The ARC path can also be checked (check this using the TV input source).
・ HDMI input (PCM , DolbyDigital , DTS) ⇒ Speaker output.
・ HDMI input(HD audio) ⇒ Speaker output.
( b The input source can be switched to any source except CBL/SAT.)
( b The input source can be switched to any source except CBL/SAT.)
・ GUI display ⇒ HDMI output.
( b The input source can be switched to any source except CBL/SAT.)
・ HDMI input (ZONE2 Function) ⇒ HDMI output (ZONE2)
( b The input source can be switched to any source except CBL/SAT.)