Reveal Battery Status; Data Transmission Speed - Inateck BCST-43 Instruction Manual

Note:If you have restored factory settings for the barcode scanner, the data
stored under inventory mode will be cleared.

Reveal Battery Status

If you want to know the remaining battery volume of the BCST-43, you may scan
the barcode "Reveal Battery Status" without scanning the "Enter Setup" barcode.
And the remaining battery amount will be output to the device connected with
the BCST-43.

Data Transmission Speed

The product defaults working under high-speed transmission mode. By default,
the data transmission interval is 0ms, which can improve your working efficiency.
If you want to use the product with some low-speed software (like the Excel on
Android phones), please adjust the data transmission interval accordingly, as the
issue of data loss or garbled characters can happen if the interval is too short.
(*) Set Data Transmission Interval as
0ms
Enter Setup
Restore Factory Setting
Reveal Battery Status
Set Data Transmission Interval as 16ms
Exit and Save
9