Table of Contents
Advertisement
3. MAINTENANCE
1. This ice dispenser must be maintained individually, referring to the
instruction manual and labels provided with the ice dispenser.
2. To obtain optimum performance of this ice dispenser, the following
consumable parts need periodic inspection, maintenance and
replacement:
These parts should be inspected at least once a year or every
10,000 hours of operation. Their service life, however, depends
on water quality and environment. More frequent inspection and
maintenance are recommended.
Consult with your local distributor about inspection and maintenance
service. To obtain the name and phone number of your local
distributor, call Hoshizaki Technical Support at 1-800-233-1940.
1) Stainless Steel Exterior
To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a
damp cloth containing a neutral cleaner to wipe off oil or dirt build up.
2) Storage Bin
• The Storage Bin is for ice use only. Do not store anything else in the bin.
• Clean the bin liner using a neutral cleaner. Rinse thoroughly after cleaning.
3) Air Filter (Air-cooled model only) - See Fig. 13
A plastic mesh air filter removes dirt or dust from the air, and keeps the Condenser from
getting clogged. As the filter gets clogged, the ice dispenser's performance will be
reduced. Check the filter at least twice a month. When clogged, use warm water and a
neutral cleaner to wash the filter.
IMPORTANT
Extruding Head
Housing
Gear Motor
Auger
Mechanical Seal
75
Hide quick links:
Advertisement
Table of Contents
