[c] WATER VALVE
If the Filter in the Water Valve becomes clogged with sediment or dirt, the
water supply will be stopped and ice cannot be made. Disassemble the
Water Valve and clean out the Filter once every two months.
1) Unplug the ice dispenser
2) Close the water supply tap.
3) Remove the panels.
4) Remove the Fitting Nut from the Water Valve. Do not lose the Packing.
5) Remove the Filter from the Water Valve, remove sediment or dirt and rinse it with water.
6) Replace the Filter on the Water Valve.
7) Replace the Packing and secure it carefully with the Fitting Nut to prevent leakage.
8) Open the water supply tap.
9) Plug in the ice dispenser.
10) Check for water leaks.
11) Replace the panels in their correct positions.
IMPORTANT
Fig. 10
72