B-Tech BT8385-CTW Quick Start Manual

Column-to-wall mounting kit use with a bt8385 column

Advertisement

Quick Links

BT8385-CTW
COLUMN-TO-WALL MOUNTING KIT
Use with a bt8385 column
PARTS LIST
1
2
ITEM
DESCRIPTION
WALL PLATE
1
BASE PLATE
2
M6 x 12mm SCREW
3
4
M8 x 50mm COACH SCREW
5
N°.10 x 50mm WALL PLUG
6
M8 T1.5mm METAL WASHER
4AF x L55mm HEX KEY
7
www.btechavmounts.com
3
4
5
7
QTY
1
1
2
4
4
4
1
6

Advertisement

Table of Contents
loading

Summary of Contents for B-Tech BT8385-CTW

  • Page 1 BT8385-CTW COLUMN-TO-WALL MOUNTING KIT Use with a bt8385 column PARTS LIST ITEM DESCRIPTION WALL PLATE BASE PLATE M6 x 12mm SCREW M8 x 50mm COACH SCREW N°.10 x 50mm WALL PLUG M8 T1.5mm METAL WASHER 4AF x L55mm HEX KEY...
  • Page 2: Installation Safety Instructions

    B-Tech AV Mounts, it’s distributors and dealers are not responsible for damage or injury caused by improper installation, improper use, modifications, installations over the specified weight capacity and/or failure to observe these safety instructions.
  • Page 3: Top View

    FIX FLOOR PLATE TO FLOOR Fix item 2 to floor (fixings not included). Note: Fixing points are 60mm away from wall. TOP VIEW 60mm 06.5mm GROUND ANCHORS (not supplied) GROUND ANCHOR CONCRETE FLOOR...
  • Page 4 MARK WALL FIXING HOLES Using the guide pins, place the column onto item 2. Mark the 4 fixing holes from item 1 onto the wall. COLUMN GUIDE PINS...
  • Page 5 DRILL HOLES AND INSERT WALL PLUGS Remove column and drill marked holes. Insert 4 x item 6 (Not required for stud/wood walls). MASONARY WALL Use a 10mm Masonary Drill Bit or a 6mm Wood Drill Bit...
  • Page 6 FIX COLUMN TO WALL Place the column onto item 2 and fix item 1 to the wall using items 4 & 5. Note: For ease of installation, the mounting rail can be assembled to the rail mounting plate before fixing the column to the wall. MOUNTING RAIL...
  • Page 7: Product Dimensions

    180mm 60mm SIDE VIEW 100mm BASE PLATE TOP VIEW FRONT VIEW 180mm 6.5mm 51mm SIDE VIEW 79.4mm THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
  • Page 8 ©2019 B-Tech International Design & Manufacturing Ltd. All rights reserved. B-Tech AV Mounts is a division of B-Tech International Design & Manufacturing Ltd. B-Tech AV Mounts, the B-Tech logo and Mode-AL are registered trade marks. All other brands and product names are trademarks of their respective owners.

Table of Contents