POSIFLEX TX-3000 Series User Manual

POSIFLEX TX-3000 Series User Manual

Fan free terminal

Advertisement

Quick Links

TX-3000/TX-3000RS Series
Fan Free Terminal
User's Manual
Rev.: A0
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his owns expense will be
required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors
or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise
damages, including without limitation loss of data or profits, resulting from the furnishing,
performance, or use of this material.
This information is provided "as is" and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex Technology, Inc. reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from: http://www.posiflex.com or http://www.posiflex.com.tw
or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.
© Copyright Posiflex Technology, Inc. 2010
All brand and product names and trademarks are the property of their respective holders.
P/N: 14500900020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-3000 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX TX-3000 Series

  • Page 1 All data should be backed-up prior to the installation of any drive unit or storage peripheral. Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this or any other Posiflex product.
  • Page 2: About This Product

    You may apply ammonia-based glass cleaner only on the screen surface. ABOUT THIS PRODUCT Posiflex TX-3000/TX-3000RS series presents a whole new generation POS terminal which with the most reliable FanFree system and carrying a brilliant performance to user in order to face the busiest situation.TX-3000/TX-3000RS Series applies Intel Pine View CPU technology;...
  • Page 3: Product Pictures

    INTRODUCTION PRODUCT PICTURES PARTS IDENTIFICATION Power switch. LED indicator for power. Cable exit (From I/O plate) PRODUCT FEATURES Standard Features: Models TX-3000/TX-3000RS Item Intel Pine View D-SC 1.66G , 512K Cache Or Pine View D-DC(Dual Core) Chipset Intel ICH8M Page 3...
  • Page 4 VGA port D-SUB 15Pin LCD DISPLAY DRAM Memory 1 x DDR2 SO-DIMM , Up to Max 2GB Serial port 4, DB9 X 3 , RJ-45 X 1 on the I/O Plate UPS Port CR PORT x1, control 2 CRS Standard USB PORT 4 port on the I/O plate ETHERNET port 10/100/1000 MB TOUCH function...
  • Page 5: Hardware Power Switch

    INSTALLATION GUIDES Hardware Power Switch The power switch located in the front bezel of main unit. It is a pushbutton switch and controls the power on/off of the whole system. Also, next to the power switch is the paper feed button for integrated printer.
  • Page 6: Display Issues

    BIOS setting. To supply the necessary power through the VGA connector, please refer to the Posiflex technical information. Do not connect other monitor to this port before the power in this port is disabled.
  • Page 7 BIOS and jumper setting and supply +12V by jumper setting. The VGA port can delivery +12 V power through system BIOS setting for Posiflex LCD display monitor. Nevertheless, except Posiflex peripheral device, do not connect any other device to this port before the power in this port is disabled.
  • Page 8: System Recovery

    The RJ11 connector in I/O area of a TX-3000/TX-3000RS system can be used for controlling most of the common cash drawers available on the market. However, it is most recommended to use Posiflex CR-2000 or CR-2200 or CR-3100 or CR-3200 or CR-4000 or CR-4100 or CR-4210 or CR-6310 for best compliance to operate the opening mechanism and to monitor the drawer open status.
  • Page 9: Operating System Installation

    Then follow instructions from your system integrator for software recovery. Operating System Installation This product is highly professionalized equipment. The installation of an OS into a machine without any preloaded OS could be a major difficulty for average user or obstacle by possibly unintentional negligence even for PC veterans to accomplish such a task.
  • Page 10: Automatic Power On Control

    +5V/+12V power supply settings is supported in system jumper setting and printer parameter setting. However, such support is limited to the application of specific Posiflex peripherals and must be disabled when the Posiflex peripherals are disconnected. Failure to follow the discipline would...

This manual is also suitable for:

Tx-3000rs series

Table of Contents