Table of Contents
Advertisement
Available languages
Available languages
Britax Child Safety, Inc.
Removing the Harness Buckle
1. Unbuckle the
harness and open the
CLICKTIGHT.
2. Lift the front of the seat
pan cover and pull over
the CLICKTIGHT bezel to
access the buckle strap
connection.
3. Remove the harness
buckle by turning the
buckle strap sideways
and routing the retainer
out of the front buckle
slot in the child seat.
4. Pull the end of the belly
pad and buckle retainer
out of the slot in the seat
pan cover to remove.
5. Turn the buckle retainer
sideways and route the
buckle assembly out of
the belly pad.
Replacing the Harness Buckle
1. Turn the buckle retainer
sideways and route it
through the fabric strip on
the belly pad.
40
Table of Contents
2. Route the belly pad and
buckle retainer through
the buckle slot in the seat
pan cover.
NOTE: Ensure that the
buckle is through the
correct cover slot for the
desired buckle position.
3. Slide the end of the belly
pad over the seat and
(if applicable) over the
comfort foam.
4. Turn the buckle retainer
sideways and route it
into the corresponding
buckle slot in the seat.
NOTE: Ensure that the
buckle is in the correct
position and the red
release button faces
out.
5. Replace the cover,
ensuring the seat pan
cover is tucked behind
the CLICKTIGHT bar, then
close the CLICKTIGHT
door.
Impact Absorbing Chest Pads
IMPORTANT:
recommended for forward-facing mode. Removal of chest
pads is optional for rear-facing mode to ensure a snug fit
for small infants.
Removing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Press harness release
b. Pull both harness
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
Impact absorbing chest pads are highly
button.
straps forward.
Table of Contents
1b
1a
41
Advertisement
Table of Contents
