Table of Contents
Advertisement
Available languages
Available languages
Britax Child Safety, Inc.
LUAS Installation
IMPORTANT:
Do not install rear facing with lower anchors for
a child weighing more than:
‐ ADVOCATE ONLY: 13.6 kg (30 lbs)
‐ BOULEVARD ONLY: 15.8 kg (35 lbs)
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar (see page 30).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat.
NOTE: Ensure that no
more than 7.5 cm (3 in.)
of the base hangs over
the edge of the vehicle
seat (see page 29).
4. Remove the lower
connectors from the
storage compartment (at
the rear of the seat) and
pull the strap to full length
toward the child's left
side.
5. Slide the lower connector
strap into the rear-facing
belt slots and firmly press
the lower connectors
over their adjacent lower
anchors.
NOTE: Verify that the
connectors are secure
and the strap is not
twisted.
12
Table of Contents
1a
1b
7.5 cm
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
6. Pull the end of the lower
connector strap to
remove slack.
7. Hold harness straps up
and away from seat while
closing the CLICKTIGHT.
NOTE: A click helps
confirm the CLICKTIGHT
is secure.
Rear-Facing Installation with Lower Anchors
9 Logo on the CLICKTIGHT dial has returned to a horizontal
position.
9 All connections are secure and straps are not twisted.
9 Child seat base is be flat on vehicle seat and is parallel to
vehicle seat.
9 Anti-rebound bar is properly installed (see page 30).
9 Recline indicator ball is within the allowable blue section for
the size of the child and that no more than 7.5 cm (3 in.) of
the base hangs over the edge of the vehicle seat (see page
28).
9 Child seat cannot be moved front to back or side to side
more than 2.5 cm (1 in.) at the belt path. If the child seat
is not secure, repeat installation or use a different seating
location.
Table of Contents
13
Advertisement
Table of Contents
