Table of Contents
Advertisement
Available languages
Available languages
Britax Child Safety, Inc.
1. Loosen and unbuckle the
harness.
a. Push harness release
button.
b. Pull both harness
straps forward.
c. Unbuckle the
harness.
2. Open the chest clip.
a. Press tabs.
b. Pull apart.
3. Remove the comfort
pillow and comfort pads
(if necessary).
4. Remove the belly pad
and buckle.
a. Open the
CLICKTIGHT and
remove the two
elastic loops on
the bottom of the
CLICKTIGHT.
b. Lift the front of
the seat pan cover
and pull over the
CLICKTIGHT bezel
to access the buckle
strap connection.
c. Remove the harness
buckle by turning
the buckle strap
sideways and routing
the retainer out of
the front buckle slot
in the child seat (see
page 40).
d. Pull the end of the
belly pad and buckle
retainer out of the
buckle slot in the
cover to remove.
e. Turn the buckle
retainer sideways and
slide the buckle out
of the belly pad. (see
page 39-40)
f.
Remove seat pan
cover.
5. Detach the hook and loop
fasteners on the head
restraint from around the
harness.
36
Table of Contents
1b
1a
2b
2a
4a
4b
4c
4d
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
6. Remove the head
restraint cover from
around the head restraint.
a. Loosen the harness
and raise the harness
to the highest
position.
b. Detach the elastic
straps from the rear
of the head restraint.
NOTE: Your select cover
set may have more than
one elastic strap.
7. Ensure the CLICKTIGHT
is open and remove the
lower seat pan cover.
a. Detach elastic loops
at front of shell.
b. Lift up from the front
to remove the lower
seat pan cover.
c. Pull cover up at sides
and around rear-
facing belt paths.
8. Lower the harness, reach
around the head restraint,
head pad and pull the
upper seat pan cover
towards you to remove.
Replacing the Cover
1. Attach one side of the
upper seat pan cover at
the forward-facing belt
path, pull the cover over
the back of the shell, and
secure at opposite belt
path.
2. Replace lower seat pan
cover.
a. Open the
CLICKTIGHT.
b. Tuck one of the
plastic tabs on the
lower seat pan cover
into the outer side of
the shell between the
forward and rear-
facing belt paths.
Table of Contents
6b
7a
7b
2a
2b
37
Advertisement
Table of Contents
