15. Drawing of table
(1) Table-mount type for the V-belt type
D
E
A 4×ø3.4 drilled hole on the bottom surface, depth 20 (Drill a hole at the time of set-up.)
B ø17 drilled hole
C 2×ø3.4 drilled hole on the bottom surface, depth 10 (Drill a hole at the time of set-up.)
D Installing position of drawer stopper (on the bottom surface)
E JUKI logo type
A
Detail drawing of measure (2:1)
– 189 –
Type: Helvetica Reg Condensed
Condensed voided letters
Y-Y (3 locations)
Thickness 1.5
Thickness 0.8
Thickness 0.5
Thickness 1.5
B
C
Z-Z
Part No. : 13429907