Adjustment procedures
Remove rubber cap ❷ in the face plate, loosen setscrew ❸ in
1.
the needle bar bracket and adjust the height of the needle bar.
2.
After adjusting the height, equally adjust the clearance A be-
tween needle ❶ and needle hole D in the throat plate and fix
the needle bar with setscrew ❸ in the needle bar bracket.
Results of Improper adjustment
◦ When the height of the needle is
excessively different, stitch skip-
ping, needle breakage, thread
breakage, etc. will be caused.
– 25 –