Adjustment Procedure Of Front-Up Amount Of The Presser Foot; Adjustment Procedure Of The Position Of The Tape Guide - JUKI MF-7900 Series Engineer's Manual

(8) Adjustment procedure of front-up amount of the presser foot

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❶

(9) Adjustment procedure of the position of the tape guide

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❷
❸
❶
❷
When sewing a thick rubber sheet or the like togeth-
er, fabric can be smoothly fed by raising the front of
presser foot ❶ .
Loosen nut ❷ , turn setscrew ❸ to the right (clock-
wise), and raise the front of presser foot ❶ for ad-
justment.
Loosen setscrew ❶ , and move tape rubber guide
base ❷ to the right and left to adjust the position of
the tape.
– 132 –