8. ADJUSTMENT PROCEDURE OF FRONT-UP AMOUNT OF THE PRESSER FOOT
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
❶
9. ADJUSTMENT PROCEDURE OF THE POSITION OF THE TAPE GUIDE
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
❷
❸
❶
❷
When sewing a thick rubber sheet or the like together, fab-
ric can be smoothly fed by raising the front of presser foot
❶ . Loosen nut ❷ , turn setscrew ❸ to the right (clockwise),
and raise the front of presser foot for adjustment.
Loosen setscrew ❶ , and move tape guide base ❷ to the
right and left to adjust the position of the tape.
– 5 –