Table of Contents
Advertisement
Quick Links
White Easel Studio TV Stand
Instruction Manual
SKU: STAND-TV65AW
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-tv65aw
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-TV65AW
Summary of Contents for Vivo STAND-TV65AW
- Page 1 White Easel Studio TV Stand Instruction Manual SKU: STAND-TV65AW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv65aw GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 70.4lbs Failure to do so may result in serious injury. (32 kg) NORMAL FLOOR Phillips Drill Screwdriver 55 lbs (25 kg) GLOSSY FLOOR ASSEMBLY STEPS STEP 1 Screw side legs (A) and center leg (B) into base of pole (E). STEP 2 Adjust collar height using the 4mm Allen wrench (L).
- Page 4 STEP 3 Remove screw from center clamp of lower VESA bracket (C) and open the clamp. STEP 4 OPTION A: Flat Back Monitor Position VESA brackets horizontally on the back of the TV, making sure upper bracket (D) is on top and lower bracket (C) is below. Secure using screws (M-A or M-B) with square washers (M-F), with security clips (G) installed to top holes.
- Page 5 STEP 4 (Continued) OPTION B: Large or Curved Back Monitor Position VESA brackets horizontally on the back of the TV, making sure upper bracket (D) is on top and lower bracket (C) is below. Secure using screws (M-C, M-D or M-E) with square washers (M-F) and spacers (M-G, M-H) with security clips (G) installed to top holes.
- Page 6 STEP 5 Slide the TV with VESA brackets (C, D) onto pole (E). Close the clamp on lower VESA bracket over the pole and secure with previously removed screw. STEP 6 Peel backing from cable clips (I) and install clips on rear leg. Use clips to organize cables. Optional: Secure cable clips using ST4.2x12 screws (J).
- Page 7 STEP 7 Adjust TV to desired height, making sure the bottom edge of the TV does not 180° ± contact the base of the pole. STEP 8 Using Security Cable Clamps (H) as guides, mark drilling locations on wall. Drill holes at least 1.6” (40mm) deep using a 9/32”...
- Page 8 - 92% within < 3hr : < 15 M www.vivo-us.com AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-TV65AW and is the answer not in the manual?
Questions and answers