Boot Configuration - Arrow SD 600eval Hardware User Manual

6.4.3 Boot Configuration

For boot mode configuration on SD 600eval board, a 4 position SPST dip switch (SW5_SPST1) is located at the bottom side of the
SD 600eval board.
CONFIG switch in ON position indicates a Logic 1 level
Boot Selection table is shown below:
Fast and secure boot selection
Forcefully entering SD 600eval board in Fast boot mode
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
CONFIG_0 CONFIG_1
(Position-1) (Position-2)
1
0
1
0
CONFIG_6
(Position-3)
1
0
FORCE_USB_BOOT
(Position-4)
1
0
1 EMERGENCY BOOT (SDC3 FOLLOWED BY USB HS)
1 SDC3 FOLLOWED BY SDC1 (eMMC)
0 SDC3 FOLLOWED BY SDC2 (Invalid)
0 SDC1 (eMMC) DEFAULT
Function
SECURITY BOOT
FAST BOOT
Function
SDC3 FOLLOWED BY SDC1 (eMMC)
NO OPERATION
Function
10/30