Jtag - Arrow SD 600eval Hardware User Manual

6.16.4 JTAG

The 96Boards CE specification allows for an optional JTAG connector.
On SD 600eval board, APQ8064 JTAG signals are routed to a non-standard Dual Row 20 Pin JTAG connector J17 (5-104655-3).
The following tables show the JTAG Connector pin out:
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Pin Signal Name
No.
1 JTAG_CONN_VREF
2 VCC_5V0/VCC_3V0
3 CPU_JTAG_TRST#
4 GND
5 CPU_JTAG_TDI
6 GND
7 CPU_JTAG_TMS
8 GND
9 CPU_JTAG_TCK
10 GND
Pin No. Signal Name
11 CPU_JTAG_TDO
12 GND
13 CPU_JTAG_RTCK
14 GND
15 CPU_JTAG_SRST#
16 GND
17 GND
18 GND
19 GNS
20 TAG_CONN_DET_N
19/30