Indoor Electronic Controllers Removal Procedures - Panasonic CS-A18CKPG Service Manual
Hide thumbs
Also See for CS-A18CKPG:
- Operating instructions manual (24 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
12.1 Indoor Electronic Controllers
Removal Procedures
TOP PREVIOUS NEXT
1. The Electronic Controller, a Signal Receiver and an Indicator (
below steps:
Open the Intake Grille and remove the screw at the front of the Front Grille. (
Remove the 3 caps and 3 screws at the bottom of the Front Grille. (
Remove the Front Grille by releasing the 3 hooks at the top of the Front Grille. (
Unhook the tabs at the Control Board to remove the Control Board Cover. (
2. To remove the Electronic Controllers:
Release the 2 Particular Piece. (
Release the CN-REC/DISP connectors. (
Release the CN-TH connector. (
Release the CN-MAIN connector. (
Release the CN-001 connector. (
Release the CN-002 connector. (
Release the CN-STM1 connector. (
Release the CN-STM2 connector. (
Release the hooks that hold the Electronic Controller. (
Fig. 3
)
Fig. 4
)
Fig. 4
)
Fig. 4
)
Fig. 4
)
Fig. 4
)
Fig. 4
)
Fig. 4
)
Fig. 1
Fig. 3
) can be seen by the
Fig. 1
)
Fig. 3
)
Fig. 1
).
Fig. 1
)
Fig. 2
)
Advertisement
Table of Contents
Troubleshooting
