19. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
19.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor
Removal Procedures
19.1.1
To Remove Front Grille
19.1.2
To Remove Horizontal Vane
2 Remove 3 caps and 4 screws at the
bottom of discharge vane and 1 screw
at the front grille.
2 hooks (left hand side)
WARNING
3 Hold both sides of the front grille and
Figure 1
Figure 2
120
remove it by pulling up and toward
yourself gently.
1 Lift to open the horizontal vane
gently.
4 Removing the control
board cover by
releasing the 2 hook.