Panasonic CS-A18CKPG Service Manual page 69

10.2.5 INDOOR UNIT ELECTRICAL
WIRING
TOP PREVIOUS NEXT
1. Remove the control board metal cover.
2. Unscrew the conduit cover & fix the conduit connector to conduit cover with lock nut, then
secure it against chassis.
3. Connecting between indoor unit and outdoor unit should be UL listed or CSA approved 6 ×
AWG16 wire.
Ensure the color of wires of outdoor unit and the terminal Nos. are the same as the
indoors respectively.
Earth lead wire should be longer than the other lead wires as shown in the figure for the
electrical safety in case the cord slips out from the anchorage.