Table 139 Recalibrate Command (1Xh); Recalibrate (1Xh) - Hitachi CinemaStar P7K500 Specifications

10.30 Recalibrate (1xh)

Command Block Output Registers
Register
Data
Feature
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head
Command
Error Register
7 6 5
CRC UNC 0 IDN
0 0 0

Table 139 Recalibrate Command (1xh)

The Recalibrate command moves the read/write heads from anywhere on the disk to cylinder 0.
If the device cannot reach cylinder 0, T0N (Track 0 Not Found) will be set in the Error Register.
HITACHI Deskstar & CinemaStar P7K500 Hard Disk Drive specification (Rev 1.1)
7 6 5 4 3 2 1 0
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
1 - 1 D - - - -
0 0 0 1 - - - -
4 3 2 1 0
0 ABT T0N AMN
0 0 V V 0
Command Block Input Registers
Register 7 6
Data - -
Error
Sector Count - -
Sector Number - -
Cylinder Low - -
Cylinder High - -
Device/Head - -
Status
Status Register
7 6 5 4
BSY RDY DF DSC DRQ COR IDX
0 V 0 V
188
5 4 3 2 1 0
- - - - - -
...See Below...
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
...See Below...
3 2 1 0
ERR
- 0 - V