Table 164 Individual Attribute Data Structure - Hitachi CinemaStar P7K500 Specifications

10.43.2.2
Individual Attribute Data Structure
The following defines the 12 bytes that make up the information for each Attribute entry in the Device Attribute
Data Structure.
Description
Attribute ID Number (01h to FFh)
Status Flags
Attribute Value (valid values from 01h to FDh)
Vender specific
Total Bytes

Table 164 Individual Attribute Data Structure

Attribute ID Numbers: Any non-zero value in the Attribute ID Number indicates an active attribute. The device
supports following Attribute ID Numbers.
ID Attribute Name
0 Indicates that this entry in the data structure is not used
1 Raw Read Error Rate
2 Throughput Performance
3 Spin Up Time
4 Start/Stop Count
5 Reallocated Sector Count
7 Seek Error Rate
8 Seek Time Performance
9 Power-On Hours Count
10 Spin Retry Count
12
Device Power Cycle Count
192 Power off Retract count
193 Load Cycle count
194 Temperature
196 Reallocation Event Count
197 Current Pending Sector Count
198 Off-Line Scan Uncorrectable Sector Count
199 Ultra DMA CRC Error Count
HITACHI Deskstar & CinemaStar P7K500 Hard Disk Drive specification (Rev 1.1)
Bytes
221
Offset
1 00h
2 01h
1 03h
8 04h
12