Non-Data Commands; Dma Data In Commands And Dma Data Out Commands - Hitachi CinemaStar P7K500 Specifications

Write Multiple FUA Ext
Write Sector(s)
Write Sector(s) Ext
Write Stream PIO
Execution includes the transfer of one or more 512 byte sectors of data from the host to the device.

9.3 Non-Data commands

These commands are:
Check Power Mode
Configure Stream
Device Configuration Freeze Lock
Device Configuration Restore
Execute Device Diagnostic
Flush Cache
Flush Cache Ext
Idle
Idle Immediate
Initialize Device Parameters
NOP
Read Native Max Address
Read Native Max Address Ext
Read Verify Sector(s)
Read Verify Sector(s) Ext
Recalibrate
Security Erase Prepare
Security Freeze Lock
Seek
Set Features
Set Max Address
Set Max Address Ext
Set Max Lock command
Set Max Freeze Lock command
Set Multiple Mode
Sleep
SMART Disable Operations
SMART Enable/Disable Attribute Autosave
SMART Enable Operations
SMART Execute Off-line Data Collection
SMART Return Status
SMART Save Attribute Values
SMART Enable/Disable Automatic Off-Line
Standby
Standby Immediate
Write Uncorrectable Ext
Execution of these commands involves no data transfer.

9.4 DMA Data In commands and DMA Data Out commands

These commands are:
Read DMA
Read DMA Ext
Read Stream DMA
Write DMA
Write DMA Ext
Write DMA FUA Ext
Write Stream DMA
Execution of this class of command includes the transfer of one or more blocks of data between the device and
HITACHI Deskstar & CinemaStar P7K500 Hard Disk Drive specification (Rev 1.1)
112