General Features - Hitachi CinemaStar P7K500 Specifications

General features

2.0
• Data capacities of 160B - 500GB
• Spindle speeds of 7200 RPM
• Fluid Dynamic Bearing motor
• Enhanced IDE interface / Serial ATA interface
• Sector format of 512 bytes/sector
• Closed-loop actuator servo
• Load/Unload mechanism, non head disk contact start/stop
• Automatic Actuator lock
• Interleave factor 1:1
• Seek time of 14 ms(1D/2D) typical without Command Overhead
• Sector Buffer size of 8192 KB(1D/2D) / 16384 KB(2D) (Upper 1000 KB / 1248.KB is used for firmware)
• Ring buffer implementation
• Write Cache
• Native command queuing support (SATA model)
• Advanced ECC On The Fly (EOF)
• Automatic Error Recovery procedures for read and write commands
• Self Diagnostics on Power on and resident diagnostics
• Parallel ATA PIO Register/Data Transfer
• Parallel ATA DMA Data Transfer
- Multiword mode Mode 2 (16.6 MB/sec)
- Ultra DMA
• Serial ATA Data Transfer
• CHS and LBA mode
• Power saving modes/Low RPM idle mode (APM)
• S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
• Support security feature
• Quiet Seek mode (AAM)
• 48 bit addressing feature
• ATA-8 compliant
• UDMA133 support
• Streaming feature set support
• World Wide Name
• Write Uncorrectable
• SATA 2.6 compliant
HITACHI Deskstar & CinemaStar P7K500 Hard Disk Drive specification (Rev 1.1)
Mode 6 (133 MB/sec)
3Gbps/1.5Gbps
Mode 4 (16.6 MB/sec)
3