Advertisement
Maintenance
1
Check the Ceiling Fan condition annually. If a
problem occurs, stop using the Ceiling Fan. Then
refer to authorized dealer.
Check point:
Loosened screws, safety wire condition, motor shaft
damage, etc.
Ensure the Safety Switch is in good condition.
2
If a problem occurs, stop using the Ceiling Fan.
Then refer to authorized dealer.
Keep the Ceiling Fan clean. Wipe away dirt with
3
a clean soft cloth, ordinary soap and water. Wipe
it again to dry it. Do not use solvents (gasoline,
petroleum, thinner, benzine, alcohol, cleaning
powder, alkaline detergent) or any other chemicals.
• Do not bend the Blade while cleaning.
Do not paint the Blades. If damaged, order a new set
4
of Blades (3 pieces) from an authorized dealer.
When referring to an authorized dealer, show these
5
instructions to them and maintain correctly.
If the product is broken or damaged, remove it from
6
the ceiling and replace with new. This is to avoid the
Ceiling Fan drops.
The Ceiling Fan suspension system should be
7
examined at least once every two years.
Do not modify or repair the LED light. If a problem
8
occurs, refer to authorized dealer (for E48GP).
6
1
:
2
Switch Lever /
Safety Switch /
Wrong Position /
Correct Position /
3
˙
4
(3
)
5
6
7
8
(
LED
E48GP).
Advertisement
