Burner Connection - Viessmann KK10 Installation, Start-Up And Service Instructions Manual

Electrical Connections

Burner Connection

to control
(RAST-5 plug)
to burner or wall vent system
( plug)
10
The Vitotronic 100 is prewired with the
Viessmann quick-connect plug-in
system.
1. Connect the RAST-5 plug to the
main circuit board of the control
(see page 8).
2. Connect 7-pole plug to the
counter plug of the burner
or
if installing a wall vent system
(accessory), connect 7-pole plug to
counter plug of wall vent system.
Refer to technical instructions
of the burner and/or wall vent
system
WARNING
Do not connect the 41-plug from the
boiler control directly to the burner if
installing a wall vent system.
See technical instructions of the wall
vent system.