Preparing For Installation; Tools And Equipment; Safety And Compliance - Cisco XR 12406 Installation Manual

Tools and Equipment

Tools and Equipment

Safety and Compliance

Cisco XR 12406 Router Installation Guide
2-2
The Cisco XR 12406 Router can be installed with a minimum number of tools.
The following tools are required:
1/4-inch and 3/16-inch flat-blade screwdrivers
•
9/16-inch wrench
•
10-mm wrench (either open-end or socket)
•
• 2-mm allen wrench
ESD-preventive wrist strap
•
Antistatic mat
•
Tape measure
•
Wire cutters
•
Pliers
•
The following guidelines help to ensure your safety and protect the equipment.
This section does not include every potentially hazardous situation, so be alert.
General Safety Guidelines, page 2-3
•
Compliance and Safety Information, page 2-4
•
Laser Safety, page 2-7
•
Lifting Guidelines, page 2-7
•
Chapter 2

Preparing for Installation

OL-13831-01