Cisco XR 12406 Installation Manual page 186

Removing and Replacing an AC PDU
Step 6
Figure 5-11 Removing the Blower Module
HIG H SPE ED
BLO WE R
Cisco XR 12406 Router Installation Guide
5-22
Remove the blower module
Lift the blower module handle to its raised (carrying) position.
a.
b. Loosen the (4) captive screws on the blower module.
Remove the blower module by grasping it on each side and pulling it straight
c.
back from the chassis.
(Figure 5-11):
Chapter 5 Maintaining the Router
OL-13831-01