Cisco XR 12406 Installation Manual page 187

Chapter 5 Maintaining the Router
Remove the PDU from the chassis
Step 7
a.
b.
c.
Figure 5-12
Install the new PDU and tighten its (4) captive screws to secure it to the chassis.
Step 8
OL-13831-01
Loosen the (4) captive screws on the PDU.
Grasp the PDU and pull it out slightly.
Move the PDU to the left and pivot the right side through the opening to
remove the PDU from the chassis opening.
Tilting the PDU at a slight angle makes it easier to remove it from the
Note
chassis.
Removing the AC PDU
Removing and Replacing an AC PDU
(Figure 5-12):
Cisco XR 12406 Router Installation Guide
5-23