Cisco XR 12406 Installation Manual page 193

Chapter 5 Maintaining the Router
Install the new power supply:
Step 4
a.
To prevent damage to the power shelf backplane connector, do not use excessive
Caution
force when inserting the power supply into the chassis.
b.
Figure 5-17
OL-13831-01
Slide the power supply into the bay until it mates with its backplane
connector.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the backplane connector
Seating the DC Power Supply
Removing and Replacing a DC PEM
(Figure 5-17).
O U TP U T
IN P U T
O K M IS W IR
E
O K
Cisco XR 12406 Router Installation Guide
5-29