Cisco XR 12406 Installation Manual page 197

Chapter 5 Maintaining the Router
Power off the circuit breakers assigned to the PEMs.
Step 2
Loosen the captive screw on each ejector lever and pivot the levers open to unseat
Step 3
the power supply from its PDU connector
•
•
Figure 5-19
OL-13831-01
It is not necessary to remove the power supply from its bay.
Repeat this step for the second power supply.
Unseating the DC Power Supply
Removing and Replacing a DC PDU
(Figure 5-19).
O U TP U T
IN P U T
M IS W IR
O K
E
O K
Cisco XR 12406 Router Installation Guide
5-33