Power On/Off; Turning On The Power; Turning Off The Power - Hitachi CP-DW10N Operating Manual

Hitachi cp-dw10n: user guide
Hide thumbs Also See for CP-DW10N:
Table of Contents

Advertisement

Power on/off

Turning on the power

Make sure that the power cord is firmly and
1.
correctly connected to the projector and the
outlet.
Make sure that the POWER indicator is
2.
steady orange (
cover.
Press the STANDBY/ON button on the
3.
projector or the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
73).
(
To display the picture, select an input signal according to the section "Selecting an
18).
input signal" (

Turning off the power

Press the STANDBY/ON button on the projector or the remote control. The
1.
message "Power off?" will appear on the screen for about 5 seconds.
Press the STANDBY/ON button again while the message appears.
2.
The projector lamp will go off, and the POWER indicator will begin blinking
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (
Attach the lens cover, after the POWER indicator turns in steady orange.
3.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
►Do not touch around the lamp cover and the exhaust vent during use or just
after use, since it is too hot.
NOTE
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON (
48) items of the OPTION menu.
(
• Use the shutdown switch (
normal procedure.
73). Then remove the lens
►A strong light is emitted when the projector's power is on. Do
75) only when the projector is not turned off by
STANDBY/ON button
POWER indicator
INPUT
STANDBY/ON
73).
47) and the AUTO POWER OFF
Power on/off
MENU
LAMP
TEMP
POWER
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
BLANK
FREEZE
PAGE
VOLUME
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
MUTE
1
2
POSITION
MENU
ENTER
ESC
RESET
17

Advertisement

Table of Contents
loading

Table of Contents