Hitachi CP-DW10N Operating Manual page 19

Press the COMPUTER button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1
● While the ON is selected for the AUTO SEARCH item in
the OPTION menu, the projector will keep checking every
port sequentially till an input signal is detected (
COMPUTER button is pressed when the VIDEO or S-VIDEO
port is selected, the projector will check the COMPUTER IN1
port first.
Press the VIDEO button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
pressed when the COMPUTER IN1 or the COMPUTER IN2
port is selected, the projector will check the S-VIDEO port
first.
Press the MY SOURCE / DOC. CAMERA button on
1.
the remote control. The input signal will be changed
into the signal you set as the MY SOURCE (
● This function also can use for document camera. Select the
input port that connected the document camera.
COMPUTER IN2
VIDEO
47). If the VIDEO button is
COMPUTER button
HDMI
47). If the
MY SOURCE /
DOC. CAMERA button
49).
Operating
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
BLANK
FREEZE PAGE VOLUME
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
19