Hitachi CP-DW10N Operating Manual page 79

Phenomenon
The lamp is turned off.
If the projector is in the standby state, please press the
STANDBY/ON button on the projector or the remote
control to turn on the lamp. If the POWER, TEMP, LAMP
indicators on the control panel of the projector represent
some errors (such as temperature error, lamp error), take
countermeasures referring to the table on page 73 and 74
and then turn on the lamp.
Scheduled
Display Image
Security features are activated and the projector is
command does
locked.
not work.
Please release the security lock.
Image data for display is not stored in the projector.
No image data for display is registered in the specified data
store number.
Store image data for display in the projector.
(
Display" in the Network guide.)
The lamp is turned off.
If the projector is in the standby state, please press the
STANDBY/ON button on the projector or the remote
control to turn on the lamp. If the POWER, TEMP, LAMP
indicators on the control panel of the projector represent
some errors (such as temperature error, lamp error), take
countermeasures referring to the table on page 73 and 74
and then turn on the lamp.
No text data for display is registered.
Scheduled
No text data for display is registered in the specified data
Display Text
store number.
command does
Store the text data for display.
not work.
(
guide.)
High-priority text data is being displayed.
(
guide and the application manual for the Messenger function.)
The projector is forced to turn the lamp on and displayed
the high-priority text data. Text display by the scheduling
function will not start until the projector completes the
display of high-priority text data.
NOTE • Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
Cases not involving a machine defect
please refer to "3.5 MY IMAGE (Still Image Transfer)
please refer to "3.6 Messenger Function" in the Network
please refer to "3.6 Messenger Function" in the Network
Troubleshooting
Reference
page
17, 73,
74
60
-
17, 73,
74
-
-
79