M Y Text Display , M - Hitachi CP-DW10N Operating Manual

Hitachi cp-dw10n: user guide
Hide thumbs Also See for CP-DW10N:
Table of Contents

Advertisement

Item
(1) Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY
(2) Use the ▲/▼ cursor buttons on the MY TEXT
MY TEXT
DISPLAY
When it is set to the ON, the MY TEXT will be
displayed on the START UP screen and the
INPUT_INFORMATION when the INFORMATION
on the SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY
(2) The current the MY TEXT will be
MY TEXT
WRITING
(3) To change an already inserted
(4) To finish entering text, move the cursor to the OK on screen and press
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to the OFF.
TEXT DISPLAY and press the ► cursor (or the ENTER) button to display
the MY TEXT DISPLAY on/off menu.
DISPLAY on/off menu to select on or off.
ON
OFF
TEXT WRITING and press the ► cursor (or the ENTER) button. The MY
TEXT WRITING dialog will be displayed.
displayed on the first 3 lines. If not yet
written, the lines will be blank.
Use the ▲/▼/◄/► cursor buttons and
the ENTER (or the INPUT) button to
select and enter characters. To erase 1
character at one time, press the RESET
(or press the ◄ cursor and the INPUT
buttons at the same time) button. Also
if you move the cursor to the DELETE
or the ALL CLEAR on screen and press
the ENTER (or the INPUT) button,
1 character or all characters will be
erased. The MY TEXT can be input up
to 24 characters on each line.
character, press the ▲/▼ cursor button
to move the cursor to one of the first 3
lines, and use the ◄/► cursor buttons
to move the cursor on the character to
be changed.
After pressing the ENTER (or the INPUT) button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
the ► cursor (or the ENTER/the INPUT) button. To revert to the previous
MY TEXT without saving changes, move the cursor to the CANCEL on
screen and press the ◄ cursor (or the ENTER/the INPUT) button.
Description
SECURITY menu
65

Advertisement

Table of Contents
loading

Table of Contents