Image Menu - Hitachi CP-DW10N Operating Manual

Hitachi cp-dw10n: user guide
Hide thumbs Also See for CP-DW10N:
Table of Contents

Advertisement

IMAGE menu

IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor (or the ENTER) button to execute
the item. Then perform it according to the following
table.
Item
ASPECT
OVER SCAN
V POSITION
(continued on next page)
32
Using the ▲/▼ cursor buttons switches the mode for aspect ratio.
For a computer signal
NORMAL
4:3
For an HDMI signal
NORMAL
4:3
For a video signal, s-video signal or component video signal
4:3
16:9
16:10
For no signal
16:10 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
• The on-screen menu might be displayed outside of the image display
area depending on the adjustment value of the ASPECT, D-ZOOM
and KEYSTONE. Changing the values of ASPECT, D-ZOOM and
KEYSTONE may fix the symptom.
Using the ◄/► cursor buttons adjusts the over-scan ratio.
Small (It magnifies picture)
• This item can be selected when input signals are video, s-video or
component video signals.
• When input signal is HDMI, this item can also be selected if either 1)
or 2) applies.
1) HDMI FORMAT is set to VIDEO.
2) HDMI FORMAT is set to AUTO, and the projector recognizes that
it receives video signals.
• When this adjustment is too large, certain degradation may appear at
the frame area of the picture. In such a case, please adjust small.
Using the ◄/► cursor buttons adjusts the vertical position.
Down
Up
• Over-adjusting the vertical position may cause noise to appear on the
screen. If this occurs, please reset the vertical position to the default
setting. Pressing the RESET button on the remote control when the V
POSITION is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal or s-video signal,
the range of this adjustment depends on the OVER SCAN (
setting. It is not possible to adjust when the OVER SCAN is set to 10.
• This item cannot be selected for an HDMI signal.
Description
16:9
16:10
NATIVE
16:9
16:10
14:9
14:9
NATIVE
Large (It reduces picture)
NATIVE
above)

Advertisement

Table of Contents
loading

Table of Contents