Audio Menu; Dmi Audio - Hitachi CP-DW10N Operating Manual

AUDIO menu

AUDIO menu
From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor (or the
ENTER) button to execute the item. Then perform it
according to the following table.
Item
VOLUME
SPEAKER
AUDIO SOURCE
HDMI AUDIO
40
Using the ◄/► cursor buttons adjusts the volume.
Low High
Using the ▲/▼ cursor buttons turns on/off the built-in speaker.
ON OFF
When the OFF is selected, the built-in speaker does not work.
The combination of a picture and audio input port can be arranged
in the menu.
The audio coming into the port selected in the (2) is output while an
image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using the ▲/▼ cursor buttons.
• Choose the AUDIO OUT STANDBY,
to select the audio output to the AUDIO
OUT ports in the standby state. The
built-in speaker does not work in the
standby state.
• While the RETURN is selected,
pressing the ◄ cursor (or the ENTER) button returns to the
previous menu.
(2) Select one of the AUDIO IN ports using the ◄/► cursor buttons.
AUDIO IN1 AUDIO IN2
• "H" is abbreviation of HDMI.
• H can be selected for HDMI port only. When H is selected, the
audio signal to HDMI port will be output if HDMI is chosen as a
picture source.
• disables the audio output.
• The C.C. (Closed Caption) is automatically activated when
selected and an input signal containing C.C. is received. This function
is available only when the signal is NTSC for the VIDEO or the
S-VIDEO, or 480i@60 for the COMPUTER IN1 or the COMPUTER
IN2, and when the AUTO is selected for the DISPLAY in the C.C.
menu under the SCREEN menu (
The HDMI AUDIO is set to 1 as default.
In case the HDMI audio does not work well, try 2.
1 2
Description
AUDIO IN3
46).
H
is