Using The Menu Function - Hitachi CP-DW10N Operating Manual

Using the menu function

This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
The EASY MENU consists of functions often used, and the other menus are
classified into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the MENU button on the projector works as the cursor
buttons. The basic operations of these menus are as follows.
INPUT button
INPUT
STANDBY/ON
To start the MENU, press the MENU button. The MENU you last used (EASY
1.
or ADVANCED) will appear. The EASY MENU has priority to appear just after
powered on.
In the EASY MENU
2.
(1) Use the ▲/▼ cursor buttons to select an item to
operate. If you want to change it to the ADVANCED
MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1) Use the ▲/▼ cursor buttons to select a menu.
The items in the menu appear on the right side.
If you want to change it to the EASY MENU,
select the EASY MENU.
(2) Press the ► cursor (or the ENTER) button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
(or the ENTER) button to progress. The operation menu or dialog of the
selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
MENU
LAMP
TEMP
POWER
MENU button
(Cursor buttons)
ENTER button
Cursor buttons
POSITION
ENTER
ESC
ESC button RESET button
Operating
MENU button
MENU
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
POSITION MENU
ENTER
RESET
ESC RESET
25