Excell KWH3 User Manual page 12

EXCELL PRECISION CO., LTD.

Alarm Mode Settings:
Sets High Limit (weight alarm limit). Low Limit is disabled (you can be freely set
any Low Limit value without any effect). The beeper setting is 32.
When weight alarm limit is reached, RelayCard (HIGHT) is activated with one
weight totalizing. When weight returns to zero, the weight alarm is deactivated (the
LCD indication is off, and RelayCard returns to normal). Totalized weight values
range from [000.000] to [999999].

Clearing Alarm Totalized Weight Values:
 Press
 When switching among weighing, counting, and alarm totalizing modes, or when
changing among the weighing units, totalized weight values are automatically
cleared.
 After turning off the electronic scale, totalized weight values are automatically
cleared.

LCD indication:
◆
To exit preset mode, please press
2. Recall Check-weighing Values
Press
Then press
Then press
Then press
3. Clearing Check-weighing Values
Press key then press
Then press
Press key then press
02029018
3 2
A 
key followed by
  

10d Low Limit
key then press
 Recall "High limit value"
key again
 Recall "Beeper value"
key again
 Back to the beginning
key again
key, and then press
key again  Clear "High limit value" and "Beeper value"
key 6 times continuously  Clear all values.
key, then all totalized weight values are cleared.
  
 
High Limit
key.
key  Recall "Low limit value"
key  Recall "Low limit value"
10 ZSME300000363