Ozito RHD-1550 Instruction Manual

Ozito RHD-1550 Instruction Manual

1500w

Advertisement

ROTARY
HAMMER
DRILL KIT
1500W
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
230–240V ~ 50/60Hz
Power:
1500W
Impact Rate:
4,100bpm
Impact Energy:
5J
No Load Speed:
0-850/min
Accessory Fitment: SDS+
Drilling Capacity:
Ø40mm (Timber)
Ø32mm (Masonry)
Ø13mm (Steel)
Weight:
4.4kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Ozito Industries Pty. Ltd.
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
1500W
ROTARY
HAMMER
WARRANTY
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
STANDARD EQUIPMENT
1500W
ROTARY
HAMMER
Rotary Hammer Drill & Side Handle
3
Grease Tub, Dust Cover & Pin
Wrench
3 x Drill Bits, Depth Rod, Flat Chisel
& Pointed Chisel
1500W
ROTARY HAMMER
1500W
ROTARY HAMMER
1500W
ROTARY HAMMER
Kitbox
RHD-1550
3
1221

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RHD-1550 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito RHD-1550

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 1221...
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION ROTARY HAMMER DRILL 1. ACCESSORIES 1. Depth Rod 8. On/Off Trigger 2. Accessory Locking Sleeve 9. Speed Dial 3. Depth Rod Locking Screw 10. Indicator LED WARNING! ENSURE THE TOOL IS TURNED OFF AND 4.
  • Page 3 Installing SDS+ Accessories Using The Dust Cover 1. Before using a drill bit in the hammer The cover catches dust and debris whilst using the drill upright or drill, ensure that the SDS+ accessory is overhead. clean of dust and debris. 1.
  • Page 4: Operation

    Pick or the depth rod touches the chisel accessory bits should surface of the workpiece. be used. REAR HANDLE Rotate the mode selector to the chisel icon and the rear mode lever to the hammer drill icon. RHD-1550...
  • Page 5: Maintenance

    Ozito Customer Service: Australia 1800 069 486 Note: Ozito Industries will not be responsible for any damage or New Zealand 0508 069 486 injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
  • Page 6: Electrical Safety

    The power supply for this product should be protected by a residual current device (rated at 30mA or less). A residual Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. current device reduces the risk of electric shock.

Table of Contents