Table of Contents
Advertisement
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system manufac-
turer for possible repairs.
A-1 BIOS Error Beep Codes
Beep Code
1 beep
5 short beeps + 1 long
beep
8 beeps
1 continuous beep
(with the front panel
OH LED on)
Appendix A
BIOS Error Beep Codes
BIOS Error Beep Codes
Error Message
Refresh
Memory error
Display memory
read/write error
System Overheat
A-1
Appendix A: BIOS Error Beep Codes
Description
Circuits have been reset.
(Ready to power up)
No memory detected in the
system
Video adapter missing or with
faulty memory
1 continuous beep with the
front panel OH LED on
Advertisement
Table of Contents
