Electronic Cruise Control - Maserati Ghibli 2016 Owner's Manual

transmission control systems. When
these systems are operating properly,
your vehicle will provide excellent
performance and fuel economy, as
well as engine emissions well within
current local regulations of various
countries.
If any of these systems require service,
the OBD system will turn on the
malfunction indicator light (MIL).
It will also store diagnostic codes and
other information to assist which the
Authorized Maserati Dealer will use to
service your vehicle. Although the
vehicle will still be drivable and not
need towing, contact an Authorized
Maserati Dealer for service as soon as
possible.
CAUTION!
• Prolonged driving with the
malfunction indicator light (MIL)
on could cause further damage to
the emissions control system. It could
also affect fuel economy and
drivability. The vehicle must be
serviced before any emissions tests
can be performed.
• If the malfunction indicator light
(MIL) is flashing while the engine is
running, severe catalytic converter
damage and power loss will soon
occur. Immediate service is required
at an Authorized Maserati Dealer.
• After the problem has been solved,
an Authorized Maserati Dealer
personnel will perform specific tests
with diagnostic equipment for a
complete check of the system and, if
necessary, also road tests, potentially
for extended distances.

Electronic Cruise Control

The electronic speed regulator (Cruise
Control) enables the driver to
maintain the desired vehicle speed
without pressing the accelerator
pedal, reducing driving fatigue on
highways, especially long trips, as the
set speed is automatically maintained.
CAUTION!
The device can only be switched on at
speeds exceeding 19 mph (30 km/h)
and it switches off automatically when
the brake pedal is pressed.
WARNING!
The Cruise Control function must only
be activated when traffic and the
route allow maintaining a constant
speed safely for a sufficiently long
distance.
Driving
5
211