Maserati Ghibli 2016 Owner's Manual page 250

In an Emergency
WARNING!
The lifted vehicle may fall and damage
the vehicle's body if the jack is not
positioned correctly.
• Turn the jack lever until the wheel is
raised a few centimeters off the
ground.
6
248
• Completely unscrew the five bolts
and remove the wheel. In case a
"Wheel Security Stud Bolt" is
installed, it can only be removed by
using the specific fitting wrench
provided with the "Wheel Security
Stud Bolt Kit", available in the
Genuine Accessories range.
• Fit the compact spare wheel with the
valve stem facing outward, securing
it with the five bolts previously
removed.
• Turn the lever of the jack to lower
the vehicle and remove the jack.
• Fully tighten the bolts, alternately
tightening diametrically opposite.
WARNING!
• FOR ALUMINIUM SPARE WHEEL
Observe the tightening torque for
the bolts securing the spare wheel
(72 ± 7 lbf·ft/ 98 ± 10 Nm). This is
equivalent to a load of
approximately 44 lb (20 kg) being
placed on the handle of the spanner
supplied when extended for use.
• FOR STEEL SPARE WHEEL
Observe the tightening torque for
the bolts securing the spare wheel
(63 ± 7 lbf·ft/ 86 ± 10 Nm). This is
equivalent to a load of
approximately 40 lb (18 kg) being
placed on the handle of the spanner
supplied when extended for use.
• To avoid the risk of forcing the
vehicle off the jack, do not tighten
the wheel bolts fully until the
vehicle has been lowered. Failure to
follow this warning may result in
personal injury.