Maserati Ghibli 2016 Owner's Manual page 112

Understanding the Vehicle
3
To activate lane change function, tap
the lever up or down once, without
moving beyond the detent. The turn
signals (right or left) will flash three
times then automatically turn off.
This function is useful when
overtaking or changing lanes.
NOTE:
• If either light remains on and does
not flash, or flashes at a fast rate,
check for a defective outside light
bulb. If an indicator fails while
moving the lever, then the indicator
bulb is probably defective.
• A "Turn Signal On" message will
appear in the instrument cluster and
a continuous chime will sound if the
vehicle is driven more than 1 mile
(1.6 km ) with either turn signal on.
110
High Beams and Flashing
To switch on the high beams with the
light switch in headlamp
"AUTO" position, shift the
multifunction lever onward.
A related telltale will illuminate
on the Rev Counter.
Pulling the lever backward (toward the
steering wheel) you switch off the
high beams and switch on the low
beams.
You can signal another vehicle with
your headlights by lightly pulling the
multifunction lever toward you. This
or
will turn on the high beams headlights
until the lever is released.
Flashing occurs also with lights off
(lights switch in position "0") if the
ignition switch is RUN position.
CAUTION!
The high beams can only be switched
on manually by pushing the
multifunction lever forward.
WARNING!
If the high beams are activated, they
will turn on automatically every time
the low beams are switched on either
manually or automatically. We