Maserati Ghibli 2016 Owner's Manual page 136

Understanding the Vehicle
Using HomeLink
To operate, press and release the
programmed HomeLink
Activation will now occur for the
programmed device (i.e., garage door
opener, gate operator, security system,
entry door lock, home/office lighting,
etc.). The hand-held transmitter of the
device may also be used at any time.
3
Security
It is advised to erase all channels
before you sell or turn in your vehicle.
To erase the channels press and hold
the two outside HomeLink
and III) until the warning light starts
flashing (after approximately 20
seconds).
®
The HomeLink Universal Transceiver is
disabled when the vehicle security
alarm is active (see "Vehicle security
alarm" in section 2).
Troubleshooting Tips
If you are having trouble
programming HomeLink
some of the most common solutions:
• Replace the battery in the original
hand-held transmitter.
• Press the LEARN button on the
garage door opener to complete the
training for a rolling code.
134
®
• Did you unplug the device for
programming and remember to plug
it back in?
®
button.
If you have any problems, or require
assistance, please call toll-free
1–800–355–3515 or, on the Internet at
www.HomeLink.com for information
or assistance.
®
buttons (I
®
, here are