Maserati Ghibli 2016 Owner's Manual page 171

Table of Contents

Advertisement

• Set Time Minutes
When in this mode, you can set the
minutes manually. To select, touch
the + or – soft-keys as done for the
hours.
• Time Format
When in this mode, you can select
the time format display. To change
the current setting, touch and
release the 12 Hrs or 24 Hrs button.
• Set Date in Cluster (MM/DD/YY)
When in this mode, you can set the
date manually in the status bar of
the MTC and on the instrument
cluster display.
Safety & Driving Assistance
Press the "Safety & Driving Assistance"
soft-key to set the following modes.
• Park Assist
The rear park assist system will scan
for objects behind the vehicle when
the transmission shift lever is in R
(Reverse) and the vehicle speed is
less than 11 mph (18 km/h). The
system can be enabled with Sound
only, Sound + Display, or turned Off.
®
See "ParkSense
Park Assist" in
section 2 for further information.
• Park Assist Volume
When this feature is selected, the
volume of park assist sensors can be
set to low, medium or high level.
The volume can also be adjusted
from the radio volume control knob
on the side of the MTC screen or
from the steering wheel radio
controls (see "Audio Controls" in
this section).
• Tilt Side Mirrors In Reverse
By selecting this feature the outside
side-view mirrors will tilt downward
when the ignition is in RUN position
Dashboard Instruments and Controls
and the transmission shift lever is in
R (Reverse) position. The mirrors will
move back to their previous
position when the transmission is
shifted out of R (Reverse).
• Blind Spot Alert
When this feature is selected, the
Blind Spot Alert (BSA) feature can
be set to Off, Lights or Lights and
Chime (default mode). When this
feature is activated in "Lights"
mode, the system will only show a
warning light in the outside mirrors.
When "Lights & Chime" mode is
activated, the system will show a
warning light in the outside mirrors
as well as give an audible alert
when the turn signal is on. When
"Off" is selected, the system is
deactivated. For description of this
system, see chapter "Blind Spot
Alert (for versions/markets, where
provided)" in section 5.
• ParkView Backup Camera
This vehicle can be equipped with
®
the ParkView
rear backup camera
which allows you to see an image of
the rear surroundings of your
vehicle whenever the shift lever is
set in R (Reverse). The image will be
displayed on the MTC display along
with a caution note to "check entire
4
169

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents