Maserati Ghibli 2016 Owner's Manual page 215

Setting Desired Speed
Turn on the electronic Cruise Control
function. When the vehicle has
reached the desired speed (in the
example: 90 mph), push downward
the multifunction switch (SET) and
release.
The green light with above the
desidered speed will illuminate on the
instrument cluster.
Release the accelerator and the
vehicle will operate at the selected
speed.
NOTE:
The vehicle should be traveling at a
steady speed and on level ground
before pushing the switch downward.
Pressing the ON/OFF button or turning
the ignition switch off erases the set
speed memory.
Changing Speed Setting
When the electronic Cruise Control is
set, you can increase cruise speed by
pushing upward the multifunction
switch (RES). Keeping the switch
pressed, the set speed will continue to
increase until the switch is released,
then the new set speed will be
maintained and memorized.
To decrease speed, push downward
the switch (SET). Keeping the switch
pushed in the downward position, the
set speed will continue to decrease
until the switch is released. Release
the switch when the desired speed is
reached, and the new set speed will
be maintained and memorized.
Pushing the multifunction switch
upward (RES) or downward (SET) once
will enable to increase or decrease the
set speed of 0.62 mph (1.0 km/h).
Each subsequent tap of the
multifunction switch will increase or
decrease the speed of 0.62 mph
(1.0 km/h).
Temporary Deactivation
A soft tap on the brake pedal, pushing
the CANCEL switch, or normal brake
pressure while slowing the vehicle will
temporarily deactivate the Cruise
Control without erasing the set speed
memory, which will appear above the
amber light (in the example:
90 mph).
If the driver presses the accelerator
pedal while the Cruise Control is on,
such as to overtake another vehicle,
and exceeds the set speed limit, the
system will temporarily deactivate the
Cruise Control.
When the accelerator pedal is
released, the vehicle will return to the
set speed and the light from amber
back to green.
Resume Speed
To resume a previously set speed, push
upward the multifunction switch (RES)
and release. The green light
above the set speed will illuminate on
the instrument cluster. Resume can be
used at any speed above 19 mph
(30 km/h).
Driving
5
with
213